| DAB modes |
Supports modes: I, II, III, IV |
|
|
|
|
| Sensitivity |
VHF Measurement to EN50248. Refer to Note 1 and Note 2 |
-94 |
-97 |
|
dBm |
| Maximum Input Signal for Pseudo channel BER with real value 1% |
Band III after error correction |
|
0 |
|
dBm |
| Adjacent Channel Selectivity |
Measurement to EN50248 |
32 |
34 |
|
dB |
| Far-off selectivity |
Measurement to EN50248. Refer to Note 2 and 3 |
45 |
48 |
|
dB |
| Input Impedance |
F type connector (to VHF/FM diplexer) |
|
50 |
|
Ohm |
| Power Consumption (with 3.3Vdc) |
DAB Band III master mode (RF+BB) |
|
220 |
|
mA |
| Audio THD |
@2Vp-p with instrumental 20K LPF enabled |
|
0.02 |
0.05 |
% |
| Audio SNR |
@2Vp-p, with instrumental 20K LPF enabled |
90 |
92 |
|
dB |
| Audio Output Load Impedance |
|
|
10K |
|
Ohm |
| Output Level (programmable) |
|
0.3 |
|
2 |
Vpp |
| Power Consumption (With 3.3Vdc) |
FM mode (FM+BB) |
|
160 |
|
mA |
| RF Sensitivity |
(S+N)/N=26dB 98MHz@22.5KHz Dev. Fmod=1KHz |
6 |
3 |
|
uV |
| (S+N)/N |
Ultimate signal to noise ratio 98MHz @200mV/22.5KHz Dev. Fmod=1KHz, Amplitude=2Vp-p |
|
54 |
|
dB |
| THD |
98MHz@200mV/75KHz Dev. Fmod=1KHz, Amplitude=2Vp-p |
|
0.3 |
0.6 |
% |
| Stereo Channel Separation |
|
30 |
33 |
|
dB |
| Audio Output Load Impedance |
|
|
10 |
|
Kohm |
| Output Level (programmable) |
98MHz@75KHz Dev. Fmod=1KHz |
0.3 |
|
2 |
Vp-p |
| Operating Temperature Range |
|
-10 |
|
65 |
 C |
| Storage Temperature Range |
|
-20 |
|
85 |
C |
| 